Entrance water meter shaft, 120 cm diameter / 150 cm height

Due to its large diameter of 1200 millimetres, this entrance water meter shaft offers ample space to fit additional accessories such as fittings and fixtures. The shaft can be installed without the need for a concrete foundation, provided the base consists of compacted sand or gravel. Instead of a concrete slab, the chamber rests on a 15-centimeter layer of compacted gravel. The shaft is self-supporting and made of high-quality polyethylene. It is suitable for placing the water meter system at a frost-free depth and it is most commonly used when the installation of a water meter inside the house is not permitted or technically feasible.

Entrance water meter shafts are used for housing water meters and other necessary devices for measuring and monitoring water flow. The diameter of the shaft is 1000 millimetres. The tank can be installed without concreting, a sand or gravel base is sufficient. The tank is self-supporting and made of high-quality polyethylene. It is a quality Czech product.

The main advantages of entrance water meter shafts are:

1. Accurate Water Consumption Measurement: entrance water meter shafts provide a suitable housing for water meters, enabling precise measurement of water consumption.
2. Easy Access for Maintenance and Repairs: entrance water meter shafts make it easy to access water meters and to perform routine maintenance or to carry out device replacements without the need for a major disruption of the water supply system.
3. Enhanced Security Against Water Theft: entrance water meter shafts can be equipped with security measures to protect water meters from unauthorized access or water theft.

The 120/150 entrance water meter shaft includes the following equipment:

• 4 built-in steps
• 2 cable glands and a clamping grommet for DN 32mm pipes
• 1 60 cm load-bearing cover with a 200 kg load bearing capacity